SM-E Double Facer
Product Features:
1. Structural features:The surface of the heating plate is grinded, the width of the hot plate is 600mm, there are 12 heating plates, the cooling setting is 4 meters.The heating plate is made of vessel plate, which conforms to the national first-class pressure vessel standard, with pressure vessel certificate and inspection certificate.
2. The upper conveyer belt rectifies the right and left side to adopt the pneumatic automatic correction deviation.
3. Heating plate heat transfer pipe temperature control sub-four-segment, with a temperature display.
4. Double cylinder S type cotton belt tensioning device is used for upper cotton belt.
5. The lower belt adopts pneumatic tension, pneumatic correction.
6. Drive roller coated with attached wear-resistant rubber ,showed a herringbone structure,With a high, ensure smooth cardboard output.
7. Main drive motor for frequency conversion motor,low-speed torque,wide speed range ,reliable, and easy maintenance.8.Hot plate internal for partition isolation structure,s-shaped flow of steam,Steam, water separation function significantly improves the utilization of steam.
Technical parameter
| Content |
Value |
| Temperature requirement |
160—200℃ |
| Steam pressure |
0.8-1.3MPa |
| Air source pressure |
0.6—0.9MPa |
| Cooling stereotypes length |
4m |
| Heating plate quantity |
12 pieces |
Roller diameter paramete
| Upper drive rubber roller diameter |
￠700mm |
| Lower drive rubber roller diameter |
￠400mm |
| Former follower with roller diameter |
￠215mm |
| Back setting belt driven roller diameter |
￠215mm |
| Platen roller |
￠70mm |
| Setting roller diameter |
￠86mm |
| Upper belt tension roller diameter |
￠155mm |
| Upper roll diameter with detuning |
￠130mm |
| Entrusted with the roll diameter lower belt |
￠130mm |
| Lower belt tension roll diameter |
￠130mm |
Note: All the roller surface after grinding are hard chrome plated
Product Tags:
|
|
CE 37KW Double Facer Corrugated Machine With 12pcs Heating Plate Images
|
