DOUBLE FACER
Structural features:
★ Heating plate surface by grinding treatment, hot plate width600mm, a total of 18 pieces heating plate, Cooling stereotypes Department 5 m.
Preheat board is made of contacts board, in accordance with the national standard of pressure container, enclosed the pressure container certificate and inspection certificate.
★ Hot plate using the touch plate design structure. Plate movements using a pneumatic spring-type structure.
★ On both sides of the upper conveyor belt deviation adjustment adopts automatic adjustment, 2 sets of the upper conveyor belt tensioning system.
★ The thermal pipe heating plate is divided into four sections to control the temperature, it has a temperature display.
★ upper cotton belt with double cylinder S cotton belt tensioning device.
★ lower cotton belt with s-shaped correction manually tensioning mechanism, structure simple and practical, under with manual fine-tuning.
★ Drive roller coated with attached wear-resistant rubber, showed a herringbone structure, With a high, ensure smooth cardboard output.
★ electric components used internationally renowned brands, device stable and reliable operation.
★ The main drive motor is variable frequency motor speed, low-speed torque, wide speed range, reliable, and easy maintenance.
★ hot plate internal for partition isolation structures-shaped flow of steam, Steam, water separation function significantly improves the utilization of steam.
★ The main backbone of high-strength GB profiles, solid structure, beautiful appearance, suitable for high-speed working.
Technical parameters:
| Max. effective width |
1800mm |
| Machine max. speed |
200m/min |
| temperature requirement |
160—180℃ |
| steam pressure |
0.8-1.3Mpa |
| air source pressure |
0.6—0.9Mpa |
| Heating plate quantity |
18 pieces |
| operation direction: left or right(according to the customer’s factory) |
Roller diameter parameters:
| up drive rubber roller diameter |
￠700mm |
Wear rubber Outsourcing
|
| bottom drive rubber roller diameter |
￠400mm |
| Former follower with roller diameter |
￠270mm |
Note: All the roller surfaces after grinding are hard chrome plated
|
| After setting belt driven roller |
￠186mm |
| Pressure belt roller diameter |
￠70mm |
| Shaping roller diameter |
￠86mm |
| The belt tension roller diameter |
￠130mm |
| The roll diameter with detuning |
￠124mm |
| Under the belt tension roller diameter |
￠130mm |
| Entrusted with the roll diameter under the belt |
￠130mm |
Power motors and electrical parameters:
| Main drive motor power |
30KW 380V 50Hz |
Continuous(S1) working standard |
| Hydraulic station motor power |
2.2KW 380V 50Hz |
Continuous (S1) working standard |
Product Tags:
|
|
0.6-0.9Mpa Air Source Pressure Double Facer Corrugated Cardboard Production Line Images
|
